Personal Service on Each Order Ensures You Get Just What You're Looking For.
We Reply Promptly to Voice and Email Messages. Please Do not Hesitate to Contact US for ANY Assistance.
- Please PHONE or EMAIL US to ORDER - We Process Payment Info Securely. Please Do Not Email Credit Card Numbers -
- E-Commerce Click Shopping Not Available -
KLUS Design PULA Extrusion
LED Tape Lighting Mounting Extrusions for Multiple Applications
For Illuminating Glass Shelves
These Cards Accepted
Mounting can be adjusted to the thickness of the shelf
Double independent lighting modes - edge and surface
ETL listed and approved for installation in all closet storage areas when factory built by KLUS as fixtures with 4.5w/ft or less.
- mounting and illumination of shelves made of glass and other materials
PULA extrusion can be used in architecture, interior decoration or during exhibitions.
- on a mounting strip with screws appropriately selected for the surface
- shelf mounted in the extrusion with adjustable spacing
PULA co sists of two extrusions: TEPULA mounting track (attached to the wall) and bent into a curved shape MAPULA extrusion, set in the mounting track. Both extrusions are connected with the ability to regulate the distance between their edges every (0.08" / 2 mm), so they can be adjusted to shelfs with thickness between (0.23" / 6 mm) and (0.78" / 20 mm). Such fixture can support weight up to 11lb on length of (11.8" / 30 cm). Maximum width of the shelf is (9.84" / 25 cm).
- the extrusion can also be used as a shelf attachment without backlighting
• Turn off LED lights during peak day light hours in outdoor applications to avoid excessive heat buildup which will result in diminished LED life.