Personal Service on Each Order Ensures You Get Just What You're Looking For.
We Reply Promptly to Voice and Email Messages. Please Do not Hesitate to Contact US for ANY Assistance.
- Please PHONE or EMAIL US to ORDER - We Process Payment Info Securely. Please Do Not Email Credit Card Numbers -
- E-Commerce Click Shopping Not Available -
KLUS Design TETRA-78 Extrusion
LED Tape Lighting Mounting Extrusions for Multiple Applications
Mounting Track for Triada
These Cards Accepted
Simplifies mounting a dedicated lighting fixture and provides space to conceal wires
- mounting a dedicated lighting fixture with a cable gland
- surface mounted with appropriately selected screws for the mounting surface
- the dedicated lighting fixture is snapped into the mounting strip
TETRA-78 mounting track is a mounting strip for TRIADA extrusion. After TETRA-78 and TRIADA have been
mounted, we obtain a groove inside high enough to route (0.31" / 8 mm) Fi cables in it. TRIADA extrusion is
attached to TETRA-78 strip with TEKNIK clips, arranged in pairs. The pairs of the clips should be applied every
(7.87" / 20 cm). TETRA-78 has its own end cap, which nicely complements the shape of TRIADA end cap. TETRA-78 track is mounted using suitable screws. The location of the drilling of holes for screws is marked by the groove inside
the extrusion.The mounting surface for TETRA-78 should be even. If there is some major roughness of the
surface, mounting screws should be located in the places of extrusion-surface adhesion (bumps).