|
 |
| Originally founded in 1977 in Warsaw Poland, Klus has become a leading designer of LED extrusions throughout Europe and has now expanded to open a parent company to support the ever changing market of LED lighting in the United States. |
is a process used to create objects of a fixed cross-sectional Profiles. increases corrosion resistance and allows for dyeing, improved lubrication, or improved adhesion. The anodized layer is non-conductive. |
|
 |
CLICK CATALOG BUTTON
For FULL SPECIFICATIONS and INSPIRATION for Your LED Application: |
 |
|
|
|
CLICK IMAGE for FULL DETAIL
| SURFACE MOUNT ALUMINUM EXTRUSIONS |
 |
 |
 |
 |
 |
|
|
|
|
Smooth Side Surface.
Line od Light. |
|
Housing for 8-10mm Wide LED Strips.
Availble in . |
|
| Extrusion can Accommodate 24mm .(0.94") Wide LED Strip. |
|
Housing for 8-10mm Wide LED Strips. Provides 4 Different Light Angles.
|
|
| Shallow Housing for 8-10mm Wide LED Strips. |
|
| SURFACE MOUNT ALUMINUM EXTRUSIONS |
|
|
|
|
| Corner Mount Housing for 8-10mm Wide LED Strips. Also Availble in . |
|
| Housing for 8-10mm Wide LED Strips. Use to Create Custom LED Lamps. |
|
| The extrusion with the LED light can be used in interior lighting, either suspended or surface mounted on stems.. With the LUK cover, a circular form may be achieved. |
|
| Architectural extrusion for LED tape – dedicated to be mounted into ceilings and drywall. For 2 - 10mm LED Strips. |
|
| Architectural extrusion for LED tape – dedicated to be mounted into ceilings and drywall. For 2 - 10mm LED Strips. |
|
| Extrusion is designed The to build universal interior lighting fixtures. This extrusion directs the light beam at an angle of 45°. |
|
| SURFACE MOUNT ALUMINUM EXTRUSIONS |
|
|
|
|
| Angle extrusion is designed to be mounted in places where surfaces are connected at right angles. |
|
| Housing for 8-12.8mm Wide LED Strips. Use to Create Custom LED Lamps. |
|
| The three-channel 8-12.8mm Wide LED Strips. |
|
| Mounting track is a low (4.3 mm) mounting strip for extrusion. |
|
| Mounting track is a mounting strip for extrusion. A groove inside high enough to route 8 mm Fi cables in it. |
|
| SURFACE MOUNT ALUMINUM EXTRUSIONS |
|
|
|
|
| The extrusion with the LED light source is ideal for creating light illuminations indoors. The possibility of getting a single line of light, thanks to a frosted cover, makes this extrusion fit all types of arrangements very well. |
|
| Mounting track is a mounting strip for extrusion. A groove inside high enough to route 8 mm Fi cables in it. |
|
| Mounting track is a low (3,6 mm) mounting strip for Profiless. A groove inside high enough to route 2 mm cable can be routed. |
|
| An the economical equivalent of a standard MICRO Profiles. |
|
| Extrusion is the economical equivalent of a standard 45-ALU extrusion. |
|
| Housing for 8-12.8mm Wide LED Strips. |
|
| SURFACE MOUNT ALUMINUM EXTRUSIONS |
| The extrusion with the LED light source is mostly used in interior lighting, especially to light cabinets, stairs, glass-cases, or as a decoration light for a niche in drywall ceilings |
|
| The extrusion is made from high quality, double-anodized aluminum, designed for LED strips that are 5 – 6 mm wide. The available Frosted PIKO cover is made of polymethyl methacrylate. |
|
| The extrusion with the LED light source is mostly used in interior lighting, especially to light cabinets, stairs, glass-cases, or as a decoration light for a niche in drywall ceilings. |
|
| The KUBIK 45 Extrusion is designated for building skeletal, cuboid configurations and light forms. |
|
| The extrusion with LED light source is mostly used as interior lighting, especially to light cabinets, stairs, glass-cases, or as a decoration light for a niche in drywall ceilings. |
|
| The extrusion with LED light source is mostly used as interior lighting, especially to light cabinets, glass-cases, or as a decorative light for niches in drywall ceilings. |
|
BACK to TOP
| RECESSED ALUMINUM EXTRUSIONS |
|
|
|
|
| Extrusion can be fixed in slots made in previously fitted drywall using gypsum adhesive. |
|
| Extrusion is designed to mount LED lighting in handrails and balustrades. Suitable for steel, stainless steel or aluminum. |
|
| Extrusion is designed to build indoor fixtures to illuminate passageways, staircases, etc. If hidden, LED strips give a soft reflected light and do not cause glare |
|
| Mounting track is used to build precise slots (grooves) in the surfaces of walls and drywall ceilings in order to fit lighting fixtures made with PDS4-ALU and PDS4-K extrusions. |
|
| Architectural extrusion for LED tape – dedicated to be mounted into ceilings and drywall. |
|
| RECESSED ALUMINUM EXTRUSIONS |
|
|
|
|
| Extrusion is designed for mounting in drywall. It makes a LED fixture that creates a line of light in wall and ceiling surfaces with no aluminum parts showing. |
|
| Extrusion is used to build flat fixtures with large shielding collars. Designed for mounting in slots made in dry-wall, flush with its surface and not exceeding their thickness. |
|
| Technical extrusion designed for making precise grooves in the surfaces of drywall or drywall ceiling in order to embed suitable LED extrusions such as: LOKOM, GIZA, GIP, LIPOD. |
|
| Recessed Shallow Housing for 8-10mm Wide LED Strips. |
|
| Recessed Shallow Housing for 8-10mm Wide LED Strips. |
|
| RECESSED ALUMINUM EXTRUSIONS |
|
|
|
|
| Technical extrusion designed for making precise grooves in the surfaces of drywall in order to embed suitable LED extrusions such as: LOKOM, GIZA, GIP, LIPOD. |
|
| Architectural extrusion for LED tape – dedicated to be mounted into ceilings and drywall. |
|
| Architectural extrusion for LED tape – dedicated to be mounted into ceilings and drywall. |
|
| KOZMA-KPL extrusion can be applied indoor for drywall ceilings. It allows for creation of interesting compositions of narrow lines of light in the surfaces of walls and ceilings. |
|
| The three-channel extrusion provides more light output. IP 67 version can be also used as outdoor lighting for elevations or architectural elements. |
|
BACK to TOP
| COVE LIGHTING ALUMINUM EXTRUSIONS |
| Recessed Illumination for a Thin Edged Suspended Ceiling Effect. |
|
| Recessed Illumination Allows Perpendicular Direction of Light. |
|
| Allows for Parallel Direction of Light. |
|
| Enables Either Parallel or Perpendicular Direction of Light. |
|
| COVE LIGHTING ALUMINUM EXTRUSIONS |
| WERKIN is a cove lighting system that is designed to illuminate monolithic interior ceilings and walls. It can be mounted in many ways: horizontal, vertical or arranged in polygonal figures. |
|
| The POLI system is designed to illuminate niches and slots in suspended ceilings and walls, offering an option of smooth control of lighting beam direction |
|
| The LIT-L KPL fixture consists of two extrusions, TELIT-L (mounting base) and ONISA. It is designated for monolithic ceiling and interior wall illuminations and can be mounted in many configurations: horizontal, vertical as well as in polygonal figures. |
|
BACK to TOP
| ALUMINUM EXTRUSIONS for ASSEMBLING HIGH LIGHT OUTPUT FIXTURES |
|
|
|
| SEPOD –a basic extrusion used to build suspended or surface mounted fixtures. Allows for a Maximum of 4 - 10.8mm LED Strips. Can be mounted with TEPO-KPL Mounting Track. |
|
| TESPO KPL– mounting track for SEPOD extrusion can conceal power cables and connections. |
|
| SEKOMA – a small flange extrusion used for building wide lines of light in drywall ceilings. . Allows for a Maximum of 4 - 10.8mm LED Strips.The extrusion is mounted with TESE & TES-16 mounting tracks. |
|
| SEKODU – wide flange extrusion to be mounted in grooves of various surfaces such as drywall. Allows for a Maximum of 4 - 10.8mm LED Strips. |
|
| ALUMINUM EXTRUSIONS for ASSEMBLING HIGH LIGHT OUTPUT FIXTURES |
|
|
| TES-16 KPL. – mounting track designed for making accurate slots (grooves) in the surfaces of walls and drywall ceilings and embedding fixtures based on the SEKOMA extrusion. |
|
| TESE KPL. – mounting track designed for making accurate slots (grooves) in the surfaces of walls and drywall ceilings and embedding fixtures based on the SEPOD extrusion. |
|
| he extrusion with LED light source is mostly used to create light illuminations inside rooms. Due to the possibility of installing a few strips inside the extrusion it can be used as a primary energy-efficient light source |
|
BACK to TOP
| ALUMINUM EXTRUSIONS with Space to CONCEAL POWER SUPPLIES |
| Extrusion is dedicated for production of surface mount and suspended fixtures. The Upper chamber with the mounted LED tape provides the additional effect of illuminating objects or surfaces located above the fixture |
|
| Extrusion dedicated for the construction of ceiling fixtures. |
|
| Extrusion dedicated for the construction of wall fixtures (sconce fixtures), with light beam directed up or down. |
|
| Extrusion dedicated for the construction of wall fixtures (sconce fixtures), with an option of simultaneous up and down lighting. |
|
BACK to TOP
| ALUMINUM EXTRUSIONS with Space to CONCEAL POWER SUPPLIES |
| Box works as an esthetic case for power supplies and electrical connections.Can be mounted to a ceiling, walls and other surfaces. |
|
| KIDES DUO KPL extrusion has two LED compartments, which enables it to direct light up and down. Optionally, an ATRA extrusion can be applied to cover the whole KIDES DUO KPL. light fixture. The light sources are then invisible, and offer aesthetic illumination. The external side of the ATRA extrusion can be finished same as the surface to which a ready fixture is mounted to. Due to this, aluminum is invisible, and left is only light distributed across the surface. |
|
| KIDES KPL. is made of TEKIDES mounting extrusion and OKIDES extrusion. This extrusion has a compartment for the selected power supplies. In this section, HSP47 covers are applied. Following the mounting of TEKIDES extrusion on the surface and after power supply cable has been installed, click-mount OKIDES extrusion. Finally, end caps are mounted. |
|
BACK to TOP
| ALUMINUM EXTRUSIONS |
| STEKO extrusion is designed for mounting on the edges of stairs, platforms, etc |
|
| The stair extrusion is made from high quality double-anodized aluminum with the option of using LED diodes illuminating the upper and lower half-space. Also Availble in . |
|
| The stair extrusion is made from high quality, double-anodized aluminum with the option of using LED diodes to illuminate the upper and lower half of the extrusion. |
|
| ALUMINUM EXTRUSIONS |
| HR-LINE frosted cover and densely spaced LEDs inside the extrusion will provide an effect of an even line of light. Due to its high integrity and high load bearing capacity. |
|
| The design and parameters of HR-ALU extrusion and its cover make the fixture durable and sturdy when mounted in the floor.. |
|
| KRAV 810 extrusion is dedicated to illuminate the edge of glass or acrylic, thickness of 8mm to 10mm. |
|
| PULA-KPL is an aesthetic constructional extrusion, which allows mounting and illuminating shelfs made of glass, wood or plastic. It comes with two compartments for LED strips. |
|
| Small dimensions, combines two functions: glass or other material can be mounted to the Profiles and illuminated by LED. |
|
BACK to TOP
| MDF EXTRUSIONS - MEDIUM DENSITY FIBERBOARD |
| Designated for interior use, especially as an integrated part of furniture pieces, to light or illuminate cabinets, glass-cases, shelving etc. |
|
| Designated for interior use, especially as an integrated part of walkway marking. |
|
| Designated for interior use, especially as an integrated part of furniture pieces, surfaces that form 45 degree angels |
|
| Designated for interior use, especially as an integrated part of furniture pieces, surfaces that form 90 degree angels. |
|
BACK to TOP
|
|
