NORA LIGHTING Recessed Lighting Directory

LINE VOLTAGE	SLOPED CEILING	LOW VOLTAGE	COMPACT FLUORESCENT	LED MARQUISE SERIES	LED SAPPHIRE SERIES	LED IOLITE SERIES	LED COBALT RETROFIT SERIES	MULTIPLE LIGHTING SYSTEMS
LOW VOLTAGE, COMPACT FLUORESCENT, LED & MONOPOINT RETROFIT KITS

LINE VOLTAGE RECESSED LIGHTING

Warm

Bright

Inviting

Nora Lighting’s family of incandescent fixtures provides a warm, bright atmosphere for anyinterior. “A” type lamps or "R" type reflector lamps can be used to provide a brilliant glow. PAR type reflector lamps provide accents to important surfaces and colors. New products include a lensless shower trim that can be used with sources up to 100 Watts.

COMMON FEATURES

A:	• Bar hangers w/ slots for T-bar grid • Knockouts on corner for tie-down to ceiling grid • Brackets on plaster frame allow bar hangers to be repositioned 90 degrees if desired
B:	• AirTight feature on selected fixtures restricts air flow to 2 cubic feet per minute maximum. Complies with WSEC standards. • Conduit and screws are gasket sealed to comply with airtight (AT) requirements.
C:	• åßßSocket plate adjusts vertically for best possible light distribution. Wing nut removes to allow complete removal of socket plate to install either gimbal ring or eyeball type trim. No-Bracket housing is also available with free floating socket.
D:	• Internal quick connects (Q) provide instant, trouble-free electrical connection, eliminating the need for wire nuts. Reduces labor time per fixture
E:	• Large J-Box provides seven 1⁄2" knockouts and four Romex pry-outs with automatic strain relief. • Allows maximum of 8 #12AWG conductors rated for 90 degrees Celsius
ALL NORA Housings are Thermally Protected

CLICK TERM TO GO TO CATEGORY

6" LINE VOLTAGE HOUSINGS and TRIMS

5" LINE VOLTAGE HOUSINGS and TRIMS

4" LINE VOLTAGE HOUSINGS and TRIMS

4" LINE VOLTAGE MR16 GU10 HOUSINGS and TRIMS

NEW! - SQUARE TRIMS

3" LINE VOLTAGE MR16 GU10 HOUSINGS and TRIMS

NEW! LENSELESS SHOWER TRIMS for WET LOCATIONS

SLOPED CEILING RECESSED LIGHTING

Flexible

Precise

Angled

To meet the challenge of providing vertical illumination from a sloped ceiling, Nora Lighting has developed a family of fixtures complete with dual-angle adjustments and ellipsoidal trims to compensate for sloped angles with as small of an aperture as possible. Nora’s sloped housings and trims are available with either incandescent or energy-saving compactfluorescent light sources.

COMMON FEATURES

A:	• Housings with AirTight feature on selected fixtures restrict air flow to 2 cubic feet per minute maximum, complying with WSEC standards.
B:	• Dual brackets allow housing to be adjusted within plaster frame and socket concurrently adjusted within the housing to achieve a perfect vertical path of illumination from a sloped ceiling. • The dual brackets inside of housing allow for horizontal adjustment to insure that lamp is centered in a vertical position for a vertical path of illumination from sloped ceiling.
C:	• Bar hangers with slots for T-Bar grid do not require additional hardware. Knockouts are provided on corners for tie-down to ceiling grid. Brackets on new construction frames allow bar hangers to be repositioned 90 degrees if desired.
D:	• Internal quick connects (Q) provide instant, trouble-free electrical connection, eliminating the need for wire nuts. Reduces labor time per fixture
E:	• Large J-Box provides seven 1/2" knockouts and four Romex pry-outs with automatic strain relief. Allows maximum of 8 #12AWG conductors rated for 90 degrees Celsius.
ALL NORA Housings are Thermally Protected

CLICK TERM TO GO TO CATEGORY

6" LINE VOLTAGE SLOPED CEILING HOUSINGS and TRIMS

6" LOW VOLTAGE SLOPED CEILING HOUSINGS and TRIMS

4" LOW VOLTAGE SLOPED CEILING HOUSINGS and TRIMS

6" COMPACT FLUORESCENT SLOPED CEILING HOUSINGS and TRIMS

LOW VOLTAGE RECESSED LIGHTING

Brilliant

Focused

Elegant

Nora Lighting’s low voltage halogen offering uses highly efficient halogen sources delivering pure white regions of light to strategic areas within any interior. Various beam spreads allow highlights of large areas or pinpointing small objects. Low voltage halogen fixtures create elegance in any design setting.

COMMON FEATURES

A:	• Magnetic Class “H” transformer features internal thermal protection device or thermally protected electronic transformer.
B:	• Porcelain 5.3 mm base socket with aluminum heat dissipation shield
C:	• Housings available with optional AirTight restrict air flow to 2 cubic feet per minute maximum, complying with WSEC standards.
D:	• Low voltage trims support MR16 light sources and all include tempered UV and shatter resistant shield
E:	• Teflon jacket with internal strain relief protects leads from mechanical and heat damage
F:	• Large J-Box provides two 3⁄4", three 1⁄2" knockouts and four Romex pry-outs with automatic strain relief. • Allows maximum of 8 #12AWG conductors rated for 90 degrees Celsius
G:	• Bar hangers w/ slots for T-bar grid • Knockouts on corner for tie-down to ceiling grid • Brackets on plaster frame allow bar hangers to be repositioned 90 degrees, if desired
H:	• Internal quick connects (Q) provide instant, trouble-free electrical connection, eliminating the need for wire nut. Reduces labor time per fixture.
ALL NORA Housings are Thermally Protected

CLICK TERM TO GO TO CATEGORY

6" LOW VOLTAGE HOUSINGS and TRIMS

4" LOW VOLTAGE HOUSINGS and TRIMS

NEW! - SQUARE TRIMS

4" LOW VOLTAGE SQUARE HOUSINGS and TRIMS

4" LOW VOLTAGE HOUSING for REMOTE TRANSFORMER and TRIMS

3" LOW VOLTAGE HOUSINGS and TRIMS

COMPACT FLUORESCENT RECESSED LIGHTING

Efficient

Reliable

Consistent

For energy-efficient applications, Nora Lighting offers a vast array of fixtures in 4-, 5- and6- apertures that accept 13W to 26W compact fluorescent light sources. Ideal for commercial, office, bath and kitchen applications, Nora’s compact fluorescent fixtures are available as horizontal or vertical with optional architectural dimming features.

COMMON FEATURES

A:	• High quality architectural and commercial 6" and 8" reflectors provide maximum efficiency with m
B:	• Socket cup affixes to horizontal reflector with dual set screws, allowing for quick installation and removal with an optional third locking screw provided if permanent setting is desired
C:	• Self flange is available with Low Iridescent 6" architectural/commercial
D:	• Reveal on Architectural/Commercial frame-ins accepts 5/8" drywall or acoustic material. Architectural frame-ins available with sleeve attachment for thicker ceilings. Consult factory for details
E:	• Universal butterfly brackets adjust vertically and accept C-channel bar hangers (NRA-38), flat bar hangers (NRA-28), or standard 1/2" conduit pipe (bar hangers not included)
F:	• Ballast available in 13W 120V magnetic and 13W-26W, Universal Electronic and Dimming (consult factory)
G:	• Large J-Box provides seven 1/2" knockouts and four Romex pry-outs with automatic strain relief.
H:	• Energy Star qualified fixtures apply to electronic ballasts only.
I:	• Internal quick connects (Q) provide instant, trouble-free electrical connection, eliminating the need for wire nut. Reduces labor time per fixture.
ALL NORA Housings are Thermally Protected

CLICK TERM TO GO TO CATEGORY

6" COMPACT FLUORESCENT HOUSINGS and TRIMS

6" COMPACT FLUORESCENT SLOPED CEILING HOUSINGS and TRIMS

5" COMPACT FLUORESCENT HOUSINGS and TRIMS

4" COMPACT FLUORESCENT HOUSINGS and TRIMS

LED MARQUISE SERIES RECESSED LIGHTING

Super Efficient

High-Performance

Environmentally Friendly

Nora introduces the Marquise Series of high performance LED downlights featuring deep cone reflectors. Dimmable Cree LEDs and Cree LED drivers for reliable performance. Available with 850, 1250, and 2000 lumen in 2700K, 3000K, 3500K, 4000K
and Comfort Dim (2800K to 1800K) temperature and cULus listed. The Marquise series is specifiable in 120V or 277V for commercial jobs of all sizes and offers dedicated EM housing back-ups for new construction and remodel applications.

COMMON FEATURES

A:	• New Construction & Remodel Housings - All Housings are IC Rated + Air-Tigh. Exceeds high efficacy requirements of California Title 24 -up to 52 lumens per watt.
B:	• Cast Aluminum Thermal Management Module - Significantly reduces air-conditioning loads and lowers energy demands.
C:	• Three aperture sizes! Our family of recessed products are available in 3-1/2", 4-1/2" and 5-1/2" apertures for all ceiling heights and applications.
D:	• Trim is standard with a self-flanged die-cast trim ring. Flange available in White and Platinum Diffused. Reflector availble in White, Black and Platinum Diffused.
E:	• Quality Osram® high output LEDs 2700,3000K3500K and 4000K, 90= CRI 15.75W on5 "5" & 26.24 Watt on6"and 10.6 Watt on 4" - rated at 50,000 hours at 70% lumen maintenance.
F:	• Triple Laminated Lens minimizes LED image
G:	• cUL Listedfor Wet Location
H:	• Driver Mounted on the junction box for cool running and long life
I:	• Dimming 2-wire dimming down to 3% with a standard incandescent dimmer. Some installations may require Electronic low voltage dimmer.
J:	• Quick Connectors Easily connect the LED trim to the LED housing
ALL NORA Housings are Thermally Protected

CLICK TERM TO GO TO CATEGORY

LED MARQUISE SERIES

6" LED HOUSINGS and TRIMS

6" LED SLOPED CEILING HOUSINGS and TRIMS

5" LED HOUSINGS and TRIMS

4" LED HOUSINGS and TRIMS

LED SAPPHIRE HIGH LUMEN SERIES RECESSED LIGHTING

Super Efficient

High-Performance

Environmentally Friendly

Nora’s Sapphire series by N-Spec is an architectural grade LED high lumen downlight available in 4", 6" and 8" aperture. The Sapphire series features deep cone, self-flanged reflectors. The open reflector provides over 55° cut-off with 0.050 high grade aluminum provides even illumination and visual comfort. The dimmable Sapphire series s available in 120V, 277V, with dedicated EM packages.

COMMON FEATURES

• Over 80% energy savings when compared to incandescent

• 850, 1250, 2000, 3000, 4000, 6000 and 8000 Lumen

• 97 Lumens per Watt and 70% Efficacy

• High color rendition - CRI 89 to 93

• 2700K, 3000K, 3500K, and 4000K, Color Temperatures, Comfort Dim option (27K-18K)

• White light dimming, standard

• Total Cree LED package

• Commercial (hanger-bar), Architectural (universal
bracket) frames and Retrofit units

• Available with dedicated emergency battery back-u

0-year limited warranty

• ULus and Energy Star listed for wet label

CLICK TERM TO GO TO CATEGORY

LED SAPPHIRE SERIES

4" LED HOUSINGS and TRIMS

6" LED HOUSINGS and TRIMS

8" LED HOUSINGS and TRIMS

LED IOLITE SERIES RECESSED LIGHTING

LED COBALT SERIES RECESSED RETROFIT LIGHTING

Super Efficient

Decorator Applications

Environmentally Friendly

Nora designed the Iolite to offer a total design solution. When style is the first priority, Iolite can match every vision with its various architectural-quality trim finishes and trim forms. And yet, Iolite’s real strength is its function and versatility. The Iolite allows users to change the beam spread from spot to narrow flood to flood without the use of tools, so that each module can be individually adjusted for its own intended purpose.

Nora Lighting’s LED Cobalt Luminaires are cULus listed for use in existing IC or non-IC housings manufactured by Nora and others. The units provide 1000 Lumen output, drawing 16W and rendering 95 CRI. Nora’s Cobalt series intergrates the latest from the Cree® COB family of LED arrays, giving bright, spectacular light output with low power consumption. The 1000Lm Cobalt is available in 120V, 277V, Triac and 0-10V dimming and EM configurations. An obvious and smart choice for green, energy efficient lighting in commercial and residential applications.

COMMON FEATURES

QUALITY

· The 1" Iolite produces about 600 lumens while drawing only about 9 watts. The 2" and 4" Iolites each produce about 800 lumens while drawing only about 14 watts. The Iolite series is rated to render a vivid 95 CRI using Cree® chip-on-board technology.
· The aluminum die-cast trims and heat sinks are formed to optimize heat dissipation while providing a high-end finish.
· Iolite is ENERGY STAR Certified, cULus Listed, Title 24 Compliant, rated for 50,000 life hours, and backed by Nora Lighting’s 5 year limited warranty.

VERSATILITY

· The Iolite Series was built to fit into any design vision with round or squaretrim types and a variety of trim styles and finishes. It is also available in five color temperatures (2700, 3000, 3500, 4000 and 5000K).
· Each unit comes with three reflectors so that the beam spread can be selected and changed without the use of tools during the final installation.
· Iolite’s options allow consistent design across multiple lighting applications. Use with Nora/Nspec Sapphire, Marquise and Cobalt series for uniform
color output.

CUSTOMIZATION

· Designers can customize Iolite’s appearance in the field with a variety of trim accessories. Create unique lighting effects with snoots available in opaque black and white, as well as frosted and colored accents and colored filters.

INNOVATION

Recognizing the challenge of accessing the driver on a unit with a small aperture, Nora designed a dedicated patent-pending housing for the Iolite. The IC air-tight housing for Iolite contains a sliding mechanism that allows the user to access the driver by pulling on a tab, a patent-pending design allowing for easy maintenance or upgrading for life.

ALL NORA Housings are Thermally Protected

CLICK TERM TO GO TO CATEGORY

LED IOLITE SERIES

1" LED HOUSINGS and TRIMS

2" LED HOUSINGS and TRIMS

4" LED HOUSINGS and TRIMS

4" LED MLS 1, 2 or 3 LIGHT MULTIPLE LIGHTING SYSTEM

LED COBALT SERIES

4" LED HOUSINGS and TRIMS

5" LED HOUSINGS and TRIMS

6" LED HOUSINGS and TRIMS

LED COBALT "CLICK" SERIES

4" LED HOUSINGS and TRIMS

5" LED HOUSINGS and TRIMS

6" LED HOUSINGS and TRIMS

6" HIGH LUMEN
LED HOUSINGS and TRIMS

MULTIPLE LIGHTING SYSTEMS

Nora Lighting Multiple Lighting System (MLS) is a multi-point lighting system providing many options and architectural flexibility. A single ceiling opening can have 1 to 5 independently adjusted and switched fixtures. Retail and Commercial applications will appreciate the look and the ability to change direction of aiming up to 5 Ceramic Metal Halide lamps on a single trip up the ladder. Nora MLS is also available in low voltage, line voltage, and custom capability for residential, commericial, retail, and galleryapplications.

METAL HALIDE RECESSED

LINE VOLTAGE RECESSED

LOW VOLTAGE RECESSED

LOW VOLTAGE SURFACE

Multiple Configurations, Trim Options and Finishes Available

METAL HALIDE RECESSED Multiple Lighting System
1 x 1 / 1 x 2 / 1 x 3 / 1 x 4 METAL HALIDE HOUSINGS	1 x 5 / 2 x 4 / L2 / L3 METAL HALIDE HOUSINGS	METAL HALIDE TRIMS

LINE VOLTAGE RECESSED Multiple Lighting System
1 x 1 / 1 x 2 / 1 x 3 / 1 x 4 LINE VOLTAGE HOUSINGS	1 x 5 / 2 x 4 / L2 / L3 LINE VOLTAGE HOUSINGS	LINE VOLTAGE TRIMS

LOW VOLTAGE RECESSED Multiple Lighting System
1 x 1 / 1 x 2 / 1 x 3 / 1 x 4 LOW VOLTAGE HOUSINGS	1 x 5 / 2 x 4 / L2 / L3 LOW VOLTAGE HOUSINGS	LOW VOLTAGE TRIMS

LOW VOLTAGE SURFACE MOUNT Multiple Lighting System
1 x 2	1 x 3	1 x 4	1 x 5	1 x 6	2 x 2

LOW VOLTAGE / COMPACT FLOURESCENT / LED & MONOP)INT RECESSED LIGHTING RETROFIT KITS

Simple Conversion

Instant Makeover

Efficient

6 KITS TO CHOOSE FROM

LOW VOLTAGE
MR16

LOW VOLTAGE
PAR36 / AR111

Nora Lighting’s Low Voltage Retrofit Kits provide an easy and affordable solution to convert existing standard 6" incandescent housings to high performance low voltage halogen fixtures. Kits are available either for MR16 or PAR36/AR111 light sources and require the use of a low voltage trim for either light source. Ideal for instantly changing general lighting to halogen spot and accent effects.

SINGLE
COMPACT FLUORESCENT

DOUBLE
COMPACT FLUORESCENT

Nora Lighting’s Compact Fluorescent Retrofit Kits provide an easy and affordable solution to convert existing standard 6" incandescent housings to energy efficient compact fluorescent. Kits are available in 13W, 18W and 26W Electronic ballast 120V. Retrofit kits are suitable for either residential or commercial applications.

LED
4, 5 and 6 INCH MODULES

Nora Lighting is excited to introduce a new
product line to our LED family, LED Retrofit
Diamond Recessed Luminaires. The Nora LED Retrofit Diamond is designed and cULus listed for use in existing 5" & 6" IC or Non- IC housings manufactured by Nora and others. Providing 650 lumen output and 86 CRI the LED Diamond Retrofit is an obvious choice for Green Energy Efficient Lighting in Commercial and Residential applications.

ONYZ LED
4, 5 / 6 INCH
ECONOMICAL RETROFITS

Nora Lighting’s new Onyx Series offers an economical quality solution to LED Retrofit Downlighting. Deep-set optics produce visual comfort in 4" and 5"/6" apertures. The Onyx produces 90+ CRI for true vibrant color rendition. Baffle and reflector styles blend with popular trims and create an uniform ceiling appearance.

LINE VOLTAGE MONOPOINT ADAPTER for TRACK and PENDANT LIGHTS

Nora Lighting's new Adapters will convert almost any 4" and 6" line voltage, medium based socket, recessed housing into a monopoint pendant or line voltage track fixture.

CLICK TERM TO GO TO CATEGORY

LOW VOLTAGE MR16
RETRO FIT KIT

LOW VOLTAGE PAR36 / AR11
RETRO FIT KIT

SINGLE COMPACT FLUORESCENT
RETROFIT KIT

DOUBLE COMPACT FLUORESCENT
RETROFIT KIT

4" LED MODULE
RETROFIT KIT

5" LED MODULE
RETROFIT KIT

6" LED MODULE
RETROFIT KIT

4". 5" / 6" LED ONYX ECONOMICAL RETROFITS

5" MONOPOINT
RETROFIT KIT

4" MONOPOINT
RETROFIT KIT