WE OFFER ALL KLUS ITEMS . CONTACT US For ITEMS NOT SHOWN. - 216-352-3685 | EMAIL US
These Cards Accepted and PROCESSED SECURELY
Create a line of light at the junction between walls and ceilings
The extrusion fits into the thickness of one drywall panel
Simple construction and assembly
Application
- to create a line of light where the ceiling meets the wall
Assembly
- fixed in the gap between the wall and the ceiling using fixing glue
- The PROTECTIVE INSERT TECH-22 ensures that the profile slot remains wide enough for the snap-in cover. Its use is NECESSARY during mounting and finishing works.
Additional information
- the profile fits in the thickness of one drywall panel
- after gluing the KOZUS-CR profile in the gap, its fixing "wings", which are in contact with the wall and the
ceiling, should be covered with tuff-tape. This will prevent the exposure of cracks caused by the work of various materials
- the use of a standard mesh or non-woven fabric may be insufficient
- the KOZUS–CR profile can be fitted with the TECH-22 protective insert, which protects the inside of the profile from contamination during assembly
Turn off LED lights during peak day light hours in outdoor applications to avoid excessive heat buildup which will result in diminished LED life.
Lead Time May Vary Based on Product Mix / Quantities Ordered
Standard Order - No Cutting
2 - 3 Days
Custom Cuts - Extrusions, Covers or LED Tape
3 - 5 Days
Custom Builds
2 - 3 Weeks
The lead times also apply to all expedited orders; however,
we will try our best to ship on the requested date.
ORDERS BELOW $150.00 are SUBJECT to a $15.00 SERVICE CHARGE
Please Provide SHIPPING ZIP CODE for Shipping Quote
CLICK IMAGE for LARGER VIEW
KOZUS-CR Extrusion
ITEM
DESCRIPTION
PRICE
C0600NA_1
39.4" / 1M Non-Anodized (Raw) Extrusion)
$53.00
C0600NA_2
78.75" / 2M Non-Anodized (Raw) Extrusion)
$106.00
Download for Achieving Line of Light, Full Specifications, Dimensions and Instructions
Here in the US, one of the more important features of LED lighting in direct view, is to achieve “a clean line of light” or in other words, no visible diodes from the LED tape light inside the fixture. Distilling this design constraint down to its basic components produces: Cones of Light and Covers. Expanding on these two characteristics gives us four elements of control when designing a fixture: Cover type, LED spacing, LED output, and Cover to LED spacing.