WE OFFER ALL KLUS ITEMS . CONTACT US For ITEMS NOT SHOWN. - 216-352-3685 | EMAIL US
These Cards Accepted and PROCESSED SECURELY
No interference with the structure of drywall ceilings and walls
Ability to create a line of light
Can be combined in straight and broken linear runs
Easy mounting
Masking the uneven edges of grooves
ETL listed and approved for installation in all closet storage areas when factory built by KLUS as fixtures with 4.5w/ft or less.
Application
- main lighting installation, especially in existing drywall structures
Assembly
- using surface springs
- using mounting adhesive
Additional information
- wide flange not requiring a precise groove
Architectural extrusions for LED tape – dedicated to be mounted into ceilings and drywall. The height of the
extrusion was designed to produce a single line of light with LEDs spaced 15 mm (0.59") apart and a frosted cover HS 22. The extrusion can accommodate two of the 10 mm (0.39") wide LED strips. Extrusion can be mounted to a surface with the use of mounting springs. The bottom side of the LESTO profile does not interfere with the support structure of the ceiling or drywall. This allows mounting a fixture based on this profile in any direction to the existing wall or ceiling. Turn off LED lights during peak day light hours in outdoor applications to avoid excessive heat buildup which will result in diminished LED life.
Lead Time May Vary Based on Product Mix / Quantities Ordered
Standard Order - No Cutting
2 - 3 Days
Custom Cuts - Extrusions, Covers or LED Tape
3 - 5 Days
Custom Builds
2 - 3 Weeks
The lead times also apply to all expedited orders; however,
we will try our best to ship on the requested date.
ORDERS BELOW $150.00 are SUBJECT to a $15.00 SERVICE CHARGE
Please Provide SHIPPING ZIP CODE for Shipping Quote
CLICK IMAGE for LARGER VIEW
LESTO Extrusion
ITEM
DESCRIPTION
PRICE
B5551ANODA_1
39.4" / 1M Silver Anodized Extrusion
$49.20
B5551ANODA_2
79.75" / 2M Silver Anodized Extrusion
$99.40
Download for Full Specifications, Dimensions and Instructions
Download for Achieving Line of Light, Full Specifications, Dimensions and Instructions
Here in the US, one of the more important features of LED lighting in direct view, is to achieve “a clean line of light” or in other words, no visible diodes from the LED tape light inside the fixture. Distilling this design constraint down to its basic components produces: Cones of Light and Covers. Expanding on these two characteristics gives us four elements of control when designing a fixture: Cover type, LED spacing, LED output, and Cover to LED spacing.