Can be mounted at any distance from the edge of the niche

- ambient lighting of architectural niches located a short distance from the wall and directed towards it

- using screws appropriately selected for the mounting surface

- can be mounted horizontally or vertically
- the light source is placed in the easily disassembled ONISA lighting fixture
NISA-KON is a set of two extrusions designed for recess illumination purposes. It consists of TENIKON mounting strip and ONISA extrusion recessed in it. The complete set enables the perpendicular direction of light to the wall. TENIKON strip is angle-bracket-shaped. The horizontal edge (without brackets) is drywall mounted. The vertical edge serves as a fixing element for ONISA extrusion, directing its light perpendicularly to the wall. ONISA extrusion holds a single 10.8 mm (0.42") max. wide LED strip. TENIKON strip can be fitted deeper in the recess, which completely hides the structure from view. TENIKON mounting strip is drywall mounted using mounting screws. NOTE! Prior to mounting, the strip must be pre-drilled to avoid unwanted deflection. The manual provides all details of mounting methods and direction of screw mounting. Rigid mounting of ONISA extrusion is performed with a silicone cord (included in the set). Turn off LED lights during peak day light hours in outdoor applications to avoid excessive heat buildup which will result in diminished LED life.