|
 |
Nora Lighting’s LED Tapelight is available in three styles: Color Changing RGB, High Output and Standard. All Nora LED Tapelight is separable every 12" and can be easily disconnected and reconnected without soldering. In addition, it is also field cuttable. Sold in 16' rolls, 12", 6" and 4" segments, LED Tapelight comes standard with pre-applied 3M™ Tape for trouble-free mounting. As with all LED sources, there is no UV light or infrared wavelengths. |
|
 |
LED 24V CCT COLOR TUNINGTAPE LIGHT
|
CCT Color Changing LED Light allows the end user to select from a 2500K to 4500K temperature with a handheld
control. Different applications require different Kelvin temperatures to enhance various color spectrums. Use 2500K for
a warm red enhancing application and 4500K for a blue/green enhancing application. The RF controller is operated with
a remote or controller that lets the end user select the temperature and intensity as the application or mood changes as
well as having the option to set optional automatic changing modes |
|
|
|
|
CLICK IMAGE for LARGER VIEW
24V 16' Roll / 16 - 12" Sections
Included with Tape Light Roll: (1) 16' (sixteen 12" connected section) Tape Roll, (15) Clear Acrylic clips with screws [NATHR-685], and (1) 12" 24V Power Line Interconnector [NAHO-609]. |
|
24V 12" Section
Included with Tape Light Section: (1) 12" Section with Male and Female Ends and (2) Shrink Wrap Tubes [NATL-400] |
|
Length x Width
x Heigh |
Price |
NUTP10-WCCT/12 |
12" Section Clear (2500K to 4500K) CCT
Color Tuning |
12" x 7/16 x 1/16 |
$9.60 |
24V 4" Section
Included with Tape Light Section: (1) 4" Section with Male and Female Ends and (2) Shrink Wrap Tubes [NATL-400] |
|
Length x Widt
x Height |
Price |
NUTP10-WCCT/4 |
4" Section Clear (2500K to 4500K) CCT
Color Tuning |
4" x 9/16 x 1/16 |
$5.25 |
BACK to TOP
COLOR TUNING CONTROLS |
NARGB-875W |
NACCT-865 |
NACCT-867 |
NACCT-868 |
|
Spectrum Wall Slide Control
(Controller + Dimmer in One) |
CCT Color Tunning Controller
(2500K-4500K |
CCT Hand Held Remote |
CCT Touch Pad Wall Controller |
Dual slide controller and dimmer.
One slider controls color
temperature and other slider
controls brightness with a positive
off. Installs in wall switch between
driver and power line interconnector
(NARGB-710W). |
|
12V/24V controller is required for
each CCT LED Tape Light run.
Installs between the driver and
the power line interconnector.
Requires CCT Hand held remote
(NACCT-867) for functions. |
|
Hand held remote is required to
operature CCT Controller
(NACCT-865). Used to toggle
between color temperatures and
dimming. |
|
Includes Mounting back box.
Requires: 24V LED driver
Functions: Local control of CCT, on/
off with memory and dimming |
|
LED STANDARD 24V TAPE LIGHT ACCESSORIES |
NARGB-762W
NARGB-763W |
NARGB-710W |
INTERCONNECT
CABLE |
NARGB-700W |
NARGB-701W |
|
10' / 30'
Controller
Power Line
Connector |
5" Power Line Splitter |
Allows easy linking of two Tape Light sections. Cables are flexible and can be moved in any direction, or be joined together for custom lengths. |
|
“Y”
Splitter Cable |
“X”
Splitter Cable |
Replaces included 9-1/2" input wire
to CCT Controller (NACCT-865).
Extends length between controller
and LED driver. |
|
Splits power line connector into two separate leads, requires power linecable. Available in Black or White. |
|
Allows splitting the Tape Light from a run or driver, into two separate runs.
White |
|
Allows splitting the Tape Light from
a run or driver, into three separate
runs. White |
|
$6.50 / $9.75 |
$2.95 |
|
$13.75 |
$14.00 |
NATL-403W |
NATHR-685 |
NATL-400 |
NATL-415W |
NATL-407
NATL-408 |
NATL-W16-2-250
NATL-W16-2-20 |
|
End Cap |
Acrylic Mounting Clips
(Pack of 15) |
Shrink Wrap Tube
(Pack of 5) |
4' Plastic Channel |
2' WireWay |
16AWG In-Wall Rated Wire |
Covers open end of Tape Light. Available in Black or White. |
|
Use in conjunction with adhesive backing to attach Tape Light to a
surface. Pack of 15 clear acrylic mounting clips are included with every Tape Light roll. |
|
Seals connection made in the field. Necessary to maintain cULus Listing. Two shrink wrap tubes are included with every Tape Light roll and section. |
|
Mounts Tape Light to various surfaces. Tape Light snaps into the
channel. Field cuttable. |
|
Field-cuttable plastic. Includes wire channel with double faced tape and cover. Available in Black or White. |
|
250' / 20'
16 AWG low voltage Class II twoconductor,
in-wall rated wire. |
|
BACK to TOP
|
LED STANDARD 24V TAPE LIGHT DRIVERS |
NATL- 524
NATL- 545 |
NATL-596 |
NATL-5030HW
NATL-5060HW
NATL-5100WH |
NMT-303/24C2D1 |
NMTD-60/24D
NMTD-96/24D |
|
24W / 45W 24V
Direct Plug-In LED Driver |
96W 124V
Direct Plug-In LED Driver |
Class II Hardwire
LED Driver |
Class II Hardwire
LED Driver with Breakers, MLV Dimming |
Class II Hardwire LED Driver
with Regulator, MLV Dimming |
|
Input: 120V
5' Cord
44" out Wire
|
|
24V - 30W
24V - 60W
24V - 100W
Input: 120V - 240V
Non-Dimmable
Includeds 10' Power Line Connector (NALTL-10) |
|
24V - 100W x 3
Input: 120V - 277V
Magnetic Low Voltage Dimming
Includeds 4-10' Power Line Connector (NALTL-10) |
|
24V - 60W
24V - 96W
Input: 120V
Magnetic Low Voltage
Integral regulator forconstant current and voltage
Includeds 10' Power Line Connector (NALTL-10) |
|
$26.00 / $54.00 |
$147.00 |
$98.00 / $164.00
$175.00
|
$745.00 |
$192.00 / $232.00 |
|
BACK to TOP
ALUMINUM CHANNELS FOR TAPE LIGHTS |
|
48" Long Shallow
with Wings |
48" Long Shallow |
48" Long Deep
with Wings |
48" Long Deep |
48" Long J-Style |
48" Long Corner |
Plastic Diffuser and End caps included |
• Field cuttable |
1.18"Wx 0.5"H |
|
Plastic Diffuser and End caps included |
• Field cuttable |
0.93"Wx 0.5"H |
|
Plastic Diffuser and End caps included |
• Field cuttable |
1.18"Wx 0.79"H |
|
Plastic Diffuser and End caps included |
• Field cuttable |
0.93"Wx 0.86"H |
|
• Field cuttable |
0.89"Wx 0.82"H |
Max Ht. 1.57" |
|
Plastic Diffuser and End caps included |
• Field cuttable |
1.88"Wx 0.75"H |
|
$26.50 |
$26.50 |
$32.00 |
$32.00 |
$26.50 |
$39.00 |
|
BACK to TOP
LED HIGH OUTPUT 24V Tape Light Sample Layout |
 |
|
|
|