|
Nora Lighting’s LED Tapelight is available in three styles: Color Changing RGB, High Output and Standard. All Nora LED Tapelight is separable every 12" and can be easily disconnected and reconnected without soldering. In addition, it is also field cuttable. Sold in 16' rolls, 12", 6" and 4" segments, LED Tapelight comes standard with pre-applied 3M™ Tape for trouble-free mounting. As with all LED sources, there is no UV light or infrared wavelengths. |
|
 |
CLICK IMAGE for LARGER VIEW
LED 24V SIDE LIT TAPE LIGHT
|
LED 24V LED Side Lit Tape Light |
|
Nora’s very low Profilee, energy efficient LED tape is only 7/16” wide and 1/16” thick. Designed to cast no shadows, our flexible LED light boasts a desirable seamless glow. Installation is easy as each roll (16 feet) is separable every 12” and can also be cut every 4” (2” on 12V). Our durable tape is available in two styles, Wet label*, IP65 rated silicone encapsulated tape, and
Damp label* IP44 non-encapsulated tape. |
|
|
|
24V 16' Roll / 16 - 12" Sections
Included with every Tape Light Roll: (1) 16' Roll, (15) Clear Acrylic clips [NATL-401], (2) Shrink Wrap Tubes [NATL-400], and (1) 9" Power Line Interconnector [NATL-509]. |
|
|
|
24V 12" Section
Included with Tape Light Section: (1) 12" Section with Male and Female Ends and (2) Shrink Wrap Tubes [NATL-400] |
|
Length x Width
x Heigh |
Price |
12" Section Clear (2700K) Warm White |
12" x 7/16 x 1/16 |
$9.50 |
12" Section Clear (3000K) Warm White |
$9.50 |
24V 4" Section
Included with Tape Light Section: (1) 4" Section with Male and Female Ends and (2) Shrink Wrap Tubes [NATL-400] |
|
Length x Widt
x Height |
Price |
4" Section Clear (2700K) Warm White |
4" x 9/16 x 1/16 |
$3.75 |
4" Section Clear (3000K) Warm White |
$3.75 |
BACK to TOP
LED STANDARD 24V TAPE LIGHT ACCESSORIES |
NALTL-10
NALTL-30 |
NATL-302 |
NATL-515 |
INTERCONNECT
CABLE |
NATL-517 |
NATL-300 |
NATL-301 |
|
10' / 30'
Power Line
Connector |
5" Power Line Splitter |
12" Power Line
Interconnector |
Allows easy linking of two Tape Light sections. Cables are flexible and can be moved in any direction, or be joined together for custom lengths. |
|
11" Power Line
Interconnector w/ Switch |
“Y”
Splitter Cable |
“X”
Splitter Cable |
For use with Class II drivers. Carries output from driver, requires
power line interconnectors. |
|
Splits power line connector into two separate leads, requires power linecable. Available in Black or White. |
|
Connects any Tape Light run to a driver. (1) Power line interconnector
is included with every Tape Light roll/kit. |
|
Allows individual switching on any
Tape Light run, and connect LED Tape Light run directly to LED Driver. 24V cable is white & 12V
cable is black. |
|
Allows splitting the Tape Light from a run or driver, into two separate runs. |
|
Allows splitting the Tape Light from
a run or driver, into three separate
runs. |
|
$6.00 / $14.00 |
$4.50 |
$5.80 |
|
$4.50 |
$7.50 |
$8.25 |
NATL-518W |
NATL-403 |
NATHR-685 |
NATL-400 |
NATL-420 |
NATL-422 |
|
Touch Dimmer
with Memory |
End Cap |
Acrylic Mounting Clips
(Pack of 15) |
Shrink Wrap Tube
(Pack of 5) |
4' Plastic Channel |
2' WireWay |
72W max., no power fail memorY |
|
Covers open end of Tape Light. Available in Black or White. |
|
Use in conjunction with adhesive backing to attach Tape Light to a
surface. Pack of 15 clear acrylic mounting clips are included with every Tape Light roll. |
|
Seals connection made in the field. Necessary to maintain cULus Listing. Two shrink wrap tubes are included with every Tape Light roll and section. |
|
Mounts Tape Light to various surfaces. Tape Light snaps into the
channel. Field cuttable. |
|
Field-cuttable plastic. Includes wire channel with double faced tape and cover. Available in Black or White. |
|
BACK to TOP
|
LED STANDARD 24V TAPE LIGHT DRIVERS |
NATL- 524
NATL- 545 |
NATL-596 |
NATL-5030HW
NATL-5060HW
NATL-5100WH |
NATL-5096-24-HWD10 |
NMT-303/24C2D1 |
NMTD-60/24D
NMTD-96/24D |
NATL-SWEX100/24A |
|
24W / 45W 24V
Direct Plug-In LED Driver |
96W 124V
Direct Plug-In LED Driver |
Class II Hardwire
LED Driver |
Class II Hardwire
LED Driver
0-10V Dimming |
Class II Hardwire
LED Driver with Breakers, MLV Dimming |
Class II Hardwire LED Driver
with Regulator, MLV Dimming |
NEXUS® All-in-One LED Driver
and Dimmer |
|
Input: 120V
5' Cord
44" out Wire
|
|
24V - 30W
24V - 60W
24V - 100W
Input: 120V - 240V
Non-Dimmable
Includeds 10' Power Line Connector (NALTL-10) |
|
24V - 90W
Input: 120V
Magnetic Low Voltage Dimming
Includeds 10' Power Line Connector (NALTL-10) |
|
24V - 100W x 3
Input: 120V - 277V
Magnetic Low Voltage Dimming
Includeds 4-10' Power Line Connector (NALTL-10) |
|
24V - 60W
24V - 96W
Input: 120V
Magnetic Low Voltage
Integral regulator forconstant current and voltage
Includeds 10' Power Line Connector (NALTL-10) |
|
24V - 100W
Input: 120V
Magnetic Low Voltage Dimming
Includeds 4-10' Power Line Connector (NALTL-10)
Dimming: Integral Dimmer
Description: Eliminates the driver
and allows 120V input and 12V or
24V output from a single gang box.
100-5% dimming and on/off switch. |
|
$26.00 / $54.00 |
$147.00 |
$98.00 / $164.00
$175.00
|
$165.00 |
$745.00 |
$192.00 / $232.00 |
$215.00 |
BACK to TOP
ALUMINUM CHANNELS FOR TAPE LIGHTS |
|
48" Long Shallow
with Wings |
48" Long Shallow |
48" Long Deep
with Wings |
48" Long Deep |
48" Long J-Style |
48" Long Corner |
Plastic Diffuser and End caps included |
• Field cuttable |
1.18"Wx 0.5"H |
|
Plastic Diffuser and End caps included |
• Field cuttable |
0.93"Wx 0.5"H |
|
Plastic Diffuser and End caps included |
• Field cuttable |
1.18"Wx 0.79"H |
|
Plastic Diffuser and End caps included |
• Field cuttable |
0.93"Wx 0.86"H |
|
• Field cuttable |
0.89"Wx 0.82"H |
Max Ht. 1.57" |
|
Plastic Diffuser and End caps included |
• Field cuttable |
1.88"Wx 0.75"H |
|
$26.50 |
$26.50 |
$32.00 |
$32.00 |
$26.50 |
$39.00 |
|
BACK to TOP |
|
|
|