|
 |
Nora Lighting’s LED Tapelight is available in three styles: Color Changing RGB, High Output and Standard. All Nora LED Tapelight is separable every 12" and can be easily disconnected and reconnected without soldering. In addition, it is also field cuttable. Sold in 16' rolls, 12", 6" and 4" segments, LED Tapelight comes standard with pre-applied 3M™ Tape for trouble-free mounting. As with all LED sources, there is no UV light or infrared wavelengths. |
|
 |
CLICK IMAGE for LARGER VIEW
LED 24V RGBW TAPE LIGHT
Nora's RGBW tape light has alternating LED diodes that are RGB and White. It is effectively two types of LED tape light in one. Users can create any color in the rainbow using the RGB function or have a single clean and crisp white light. Both color settings are programmable and have adjustable brightness and action features that are controlled with the press of a button. This flexible LED light source is a durable and cULus listed for damp applications. |
|
|
RGBW LED 24V LED Tape Can Create Up To 16 Colors! |
Program a single stationary color or multiple transitioning colors.
- 3 Brightness Levels -
Each RGBW LED run requires a controller and driver/power supply |
 |
|
|
24V RGBW 16' Roll / 16 - 12" Sections
ncluded with Tape Light Roll: (1) 16' Roll, (15) Clear Acrylic clips, (2) Shrink Wrap Tubes [NATL-400], and (1) 12" Power Line Interconnector [NARGB-710]. |
|
24V RGBW 12" Section
Included with Tape Light Section: (1) 12" Section with Male and Female Ends and (2) Shrink Wrap Tubes [NATL-400] |
|
Length x Width
x Heigh |
Price |
12" Section RGBW |
12" x 9/16 x 1/16 |
$15.00 |
24V RGBW 6" Section
Included with Tape Light Section: (1) 6" Section with Male and Female Ends and (2) Shrink Wrap Tubes [NATL-400] |
|
Length x Widt
x Height |
Price |
6" Section RGBW |
6" x 9/16 x 1/16 |
$9.00 |
LED 24V RGBW TAPE LIGHT ACCESSORIES |
NARGBW-965 |
NARGBW-967 |
|
RGBW Full Color RF Controller |
RGBW Controller Hand Held Remote
|
360W Max. A controller is required for each RGBW LED Tape Light run. Installs between the driver and the power line interconnector. The controller can be used to toggle between colors or changing modes. |
|
Used to program RGBW tape light to certain color configurations. Can be used up to 22' from RGBW controller, must be in direct view. Key Selections: Brightness, Colors, Color Changing - Flash, Strobe, |
|
NALTL-30
NALTL-10 |
NARGBW-962
NARGBW-963 |
NATL-302 |
NARGBW-910 |
INTERCONNECT
CABLE |
NARGBW-900 |
NARGBW-901 |
|
10' / 30'
Power Line
Connector |
10' / 30'
Controller
Power Line
Connector |
5" Power Line Splitter |
12" Power Line
Interconnector |
Allows easy linking of two Tape Light sections. Cables are flexible and can be moved in any direction, or be joined together for custom lengths. |
|
“Y”
Splitter Cable |
“X”
Splitter Cable |
For use with Class II drivers. Carries output from driver, requires
power line interconnectors. |
|
Replaces included 9-1/2" input wire, to allow for 30' or less length
between controller and LED Driver |
|
Splits power line connector into two separate leads, requires power linecable. Available in Black or White. |
|
Connects any Tape Light run to a driver. (1) Power line interconnector
is included with every Tape Light roll/kit. |
|
Allows splitting the Tape Light from a run or driver, into two separate runs. |
|
Allows splitting the Tape Light from
a run or driver, into three separate
runs. |
|
$6.00 / $14.00 |
$7.50 / $12.50 |
$4.50 |
$4.50 |
|
$13.75 |
$14.50 |
NATL-403 |
NATHR-685 |
NATL-400 |
NATL-420 |
NATL-422 |
|
End Cap |
Acrylic Mounting Clips
(Pack of 15) |
Shrink Wrap Tube
(Pack of 5) |
4' Plastic Channel |
2' WireWay |
Covers open end of Tape Light. Available in Black or White. |
|
Use in conjunction with adhesive backing to attach Tape Light to a
surface. Pack of 15 clear acrylic mounting clips are included with every Tape Light roll. |
|
Seals connection made in the field. Necessary to maintain cULus Listing. Two shrink wrap tubes are included with every Tape Light roll and section. |
|
Mounts Tape Light to various surfaces. Tape Light snaps into the
channel. Field cuttable. |
|
Field-cuttable plastic. Includes wire channel with double faced tape and cover. Available in Black or White. |
|
NATL-415W |
NATL-407
NATL-408 |
NATL-W16-2-250
NATL-W16-2-20 |
NATL-404W
NATL-405W |
NATL-406W |
|
Low Voltage
Splice Box |
Terminal / Splitter Block |
16AWG In-Wall Rated Wire |
J-Clip for Wire, Plastic - 10 Pack
Over the Wire Clip, Plastic - 10 Pack |
Wire Clip, Plastic - 10 Pack |
Use to join low voltage lead to
power line connector. |
|
4-Way
2-3/8"L x 1-1/8"W x 7/8"D
8-Way
4"L x 1-1/8"W x 7/8"D |
|
250' / 20'
16 AWG low voltage Class II twoconductor,
in-wall rated wire. |
|
BACK to TOP
LED 24V TAPE LIGHT DRIVERS |
NATL- 524
NATL- 545 |
NATL-596 |
NATL-5030HW
NATL-5060HW
NATL-5100WH |
NMT-303/24C2D1 |
NMTD-60/24D
NMTD-96/24D |
|
24W / 45W 24V
Direct Plug-In LED Driver |
96W 124V
Direct Plug-In LED Driver |
Class II Hardwire
LED Driver |
Class II Hardwire
LED Driver with Breakers, MLV Dimming |
Class II Hardwire LED Driver
with Regulator, MLV Dimming |
|
Input: 120V
5' Cord
44" out Wire
|
|
24V - 30W
24V - 60W
24V - 100W
Input: 120V - 240V
Non-Dimmable
Includeds 10' Power Line Connector (NALTL-10) |
|
24V - 100W x 3
Input: 120V - 277V
Magnetic Low Voltage Dimming
Includeds 4-10' Power Line Connector (NALTL-10) |
|
24V - 60W
24V - 96W
Input: 120V
Magnetic Low Voltage
Integral regulator forconstant current and voltage
Includeds 10' Power Line Connector (NALTL-10) |
|
$26.00 / $54.00 |
$147.00 |
$98.00 / $164.00
$175.00
|
$745.00 |
$192.00 / $232.00 |
|
|
|
BACK to TOP
ALUMINUM CHANNELS FOR TAPE LIGHTS |
|
48" Long Shallow
with Wings |
48" Long Shallow |
48" Long Deep
with Wings |
48" Long Deep |
48" Long J-Style |
48" Long Corner |
Plastic Diffuser and End caps included |
• Field cuttable |
1.18"Wx 0.5"H |
|
Plastic Diffuser and End caps included |
• Field cuttable |
0.93"Wx 0.5"H |
|
Plastic Diffuser and End caps included |
• Field cuttable |
1.18"Wx 0.79"H |
|
Plastic Diffuser and End caps included |
• Field cuttable |
0.93"Wx 0.86"H |
|
• Field cuttable |
0.89"Wx 0.82"H |
Max Ht. 1.57" |
|
Plastic Diffuser and End caps included |
• Field cuttable |
1.88"Wx 0.75"H |
|
$26.50 |
$26.50 |
$32.00 |
$32.00 |
$26.50 |
$39.00 |
|
BACK to TOP
LED RGB 24V Tape Light Sample Layout |
 |
Two coves linked
together for simultaneous
synchronized operation. |
|
|
|
|