Personal Service on Each Order Ensures You Get Just What You're Looking For.
We Reply Promptly to Voice and Email Messages. Please Do not Hesitate to Contact US for ANY Assistance.
- Please PHONE or EMAIL US to ORDER - We Process Payment Info Securely. Please Do Not Email Credit Card Numbers -
- E-Commerce Click Shopping Not Available -
Nora 6 Inch Recessed
Retrofit Conversion Kits
Low Voltage Kits / Compact Fluorescent Kits
ILLUMENATE
These Cards Accepted
and
Processed Securely
Nora Lighting's 6" Low Voltage and Compact Fluorescent Retrofit Conversion Kits make it easy and affordable to convert existing 6" Incandescent Housings to either High Performance Low Voltage Halogen Fixtures or to Energy Efficient Compact Fluorescent Fixtures.
Ideal for instantly changing general lighting to halogen spot and accent effects.
Transformer: Pre-mounted to socket plate. 120V Input, 12V Output with MR16 socket. Quick installation screw base to medium socket included.
Transformer: Pre-mounted to socket plate. 120V Input, 12V Output with Spade Terminals for PAR36 or AR111 light source. Quick nstallation screw base to medium socket included.
No Transformer Necessary:Dimmable with Standard Dimmer. Quick nstallation screw base to medium socket included.
50W / 12V MR16 Max.
50W / 12V PAR36/AR111 Max.
50W /120V MR16 GU10 Max.
Minimum Clearances: NLK Retrofit kits are intended only for use as non-IC components and upon installation, the housing used for the kit must maintain minimum clearances of 3" from thermal insulation and 1/2" from adjacent building components.
RETROFIT CONVERSION KITS Sold Separately from BULBS (except NRA-37/10), TRIMS and HOUSINGS
Single Compact Fluorescent Retrofit Kit
1 x 13W Magnetic Ballast 2-Pin Twin Tube - Nno- IC Rated 1 x 13W Electronic Ballast 2-Pin Quad / Triple Tube - IC Rated 1 x 18W Electronic Ballast 2-Pin Quad / Triple Tube - IC Rated 1 x 26W Electronic Ballast 2-Pin Quad / Triple Tube - No- IC Rated
Dual Compact Fluorescent Retrofit Kit
2 x 13W Magnetic Ballast 2-Pin TwinTube - Non-IC Rated
* Because high power factor ballasts are more efficient than lonw power factor units, they are specified for all commercial lighting applications. Lower power factor equipment requires higher line currents and can load the branch circuits, as well as those of the utility supplying the power (sometimes resulting in penalty charges). Low power factor ballasts require about twice the current needed by high power factor ballasts, allowing fewer fixtures per circuit and creating added wiring costs.
Retrofit kits are suitable for either residential or commercial applications.
Minimum Clearances: NPK Retrofit kits are intended only for use as non-IC components and upon installation, the housing used for the kit must maintain minimum clearances of 3" from thermal insulation and 1/2" from adjacent building components.
RETROFIT CONVERSION KITS
Sold Separately from BULBS, TRIMS and HOUSINGS