|
 |
LEDs mounted to Flexible Printed Circuit Board technology, and
extruded in a 7.6mm x 15mm PVC light strip. Crush proof to 100 psi.
LEDs consume only2.2 watts per foot. Field cuttable every 6" and
reconnectable with user installed male and female connectors. |
|
 |
| LED eStrip is Ideal for Ceiling and Wall Coves, Display Cases ,Rails, Stairs, Decks, Soffits, Eaves, Exhibit Projects, Theatrical Projects, Visual Merchandising, Decorative Accents and Architectural Accents. |
|
LED ESTRIP FEATURES
| • Low Energy Consumption - Just 2.2 Watts / Foot |
• 40,000 Hour Life LED Rated Life |
| • Available in RGB |
|
| |
| • 1.3" LED Spacing on Center |
• Profilee: 7.6mm Height x 15mm Width |
| • 40' Maximum Single Run |
• Field Cuttable Every 8" |
| • ETL Listed for Indoor and Outdoor Applications |
• 2-Year Warranty |
| • Connections: User installed male and female connectors. Molded "+", "T", and
"L" connectors. Molded extension cords. Indoor listed CL2 cords allow
wire to be passed through cabinets and walls to/between fixtures.
Outdoor listed burial cords allow wire to be routed below grade
to/between fixtures. See instructions for details. |
 |
|
|
 |
| ITEM |
Color |
PRICE / FOOT |
| $66.00 |
|
|
 |
| ITEM |
Color |
PRICE / SPOOL |
| $2199.00 |
|
BACK to TOP
|
| This RF touch RGB controller uses the advanced touch technology. Mainly used to control constant voltage LED products, such as RGB LED Tape Light, RGB eSTRIP, RGB Hard Strip, RGB Mini Flood Lights. Users can choose different changing mode, adjust the color changing speed and brightness, and turn on/off using the remote control according to their preference. The controller has power off memory function, meaning that when turned back on, it will start with the last changing mode it saved. It has 18 pre-programmed functions. |
|
| WIFI -V03 controller combined with the installation of controlling software on mobile devices Android or IOS V03 controller appeared with the installation of controlling software on mobile devices. |
|
| CLICK BUTTON for SPECIFICATIONS |
 |
|
| $99.00 |
$162.00 |
BACK to TOP
| LED ESTRIP WIRING and MOUNTING ACCESSORIES |
| LES-BTFN |
LES-BTMN |
LES-BTSN |
| LES-BTMCI-1.5 |
| LES-BTMCI-6 |
|
LES-BTMC-G4-SI |
LES-BTMC-G4-SO |
|
|
|
|
| 1.5’ / 6.0' Power connector |
|
Signal in connector for RGB eStrip connection to
outdoor signal amplifier |
|
| Signal out connector for RGB eStrip connection to outdoor signal amplifier |
|
| $5.75 |
$5.75 |
$9.50 |
$15.50 / $19.75 |
$21.00 |
$21.00 |
| LES-001-OD-6FT |
LES-STCN |
LES-STFN |
LES-STPV-T |
LES-SNPT |
LES-C-6 |
|
6' Power feed connector for
connection to outdoor signal amplifier |
|
| Cutting end cap - Bag of 5 |
|
| Female end cap - Bag of 2 |
|
| 39.4" Clear PVC mounting “U” channel |
|
Wood nail clips,
1/4” X 1/2” (6mm x 12mm - Bag of 100 |
|
|
| $11.20 |
$0.89 |
$1.90 |
$18.50 |
$18.00 |
$8.75 |
| LES-MX-1 |
|
|
|
| 6’ (1.8m) / 30’ (9.1m) Extension cord |
|
| $1.00 |
$16.00 / $39.00 |
|
|
