Personal Service on Each Order Ensures You Get Just What You're Looking For.
We Reply Promptly to Voice and Email Messages. Please Do not Hesitate to Contact US for ANY Assistance.
- Please PHONE or EMAIL US to ORDER - We Process Payment Info Securely. Please Do Not Email Credit Card Numbers -
- E-Commerce Click Shopping Not Available -
DIODE LED Power Supplies 12V, 24V and 48V VLM Series Super Compact Constant Voltage Drivers
12V and 24V Hard-Wired Constant Voltage Dimmable - on Low Voltage Side - Drivers
ILLUMENATE
These Cards Accepted
and
Processed Securely
Diode LED offers a full range of 12V DC Power Supplies, Controls and Wiring
Accessories that allow for consistent and simple installation of all of their LED products.
ALL DIMENSIONS in INCHES CLICK IMAGE for LARGER VIEW
HARD-WIRED CONSTANT Voltage 12V, 24V and 48V VLM SERIES NON-DIMMABLE DRIVERS
These VLM 12VDC, 24VDC, and 48VDC Constant Voltage LED Drivers are an excellent choice to pair with On/Off switches. These hard-wired drivers are available in multiple form factors and voltage/wattage combinations to meet your low-voltage LED lighting needs.
FEATURES
• For use with 120VAC - 277VAC installations.
• Class 2 models available
• Available in 12, 24, or 48 volt output versions.
• UL Certified & Component Recognized
• Short circuit, over current, over voltage, and over temperature protections
HARD-WIRED CONSTANT VOLTAGE 12V NON-DIMMABLE DRIVERS - Dimmable on 12V Side -
Hard-Wired Non-Dimmable Drivers should be hard-wired to household AC power by a licensed electrician. Any of our dimmable light fixtures, powered by a Hard-Wired -Dimmable driver, can be dimmed using any of our 3 REIGN 12V / 24V in-wall switches or the in-line 12V/ 24V Dimmer Switch. Note: DIMMING OCCURS on the 12V Side of the Installation.
DI-0941
DI-0904
DI-0939 DI-0908
DI-0918 DI-0906
DI-0909
DI-0928
12W Driver
20W Driver
25W Mini Driver
150W Driver
35W Driver 60W Driver
200W Driver
300W Driver
Indoor Dry Location
Class 2
Wet / Dry Location
Class 2
Dust-Free Dry Location / Class 2 Dust-Free Dry Location Non-Dimmable
Wet / Dry Location
Class 2 Wet / Dry Location
Class 2
Dust-Free Dry Location
Non-Dimmable
Dust-Free Dry Location
Non-Dimmable
3.03" x 1.57" x 1.14"
4.65" x 1.38" x 1.02"
3.07" x 2.01" x 1.1" 7.83" x 3.9" x 2.0"
5.83" x 1.57" x 1.18" 6.4" x 1.67" x 1.26"
8.9" x 2.7" x 1.6"
8.5" x 4.13" x 1.61"
$34.20
$45.00
$66.15 / $222.75
$66.15 / $77.55
$268.65
$481.50
120 / 240 / 277VAC
DRIVER MOUNTING
BRACKETS
DI-CV-MW12V40W-277
DI-DV-12V60W-277
DI-1733
40W Driver
60W Driver
For use with DI-0908, DI-0909 or DI-0928
The
Driver Mounting Brackets allow for easy driver mounting and is an
essential part of most installation inspections. Each order comes with
four brackets and four screws.
• For Use with PWM Dimmers, On/Off Switches, DMX Systems, RGB Controllers
• Indoor / Outdoor Use
5.9" x 2.1" x 1.5"
9.5" x 1.7" x 1.14"
0.8" x 0.6" x 0.65"
$135.00
$136.80
$9.90
WIRE BOXES
MINI TERMINAL
JUNCTION BOX
LO-PRO JUNCTION BOXES
MEANWELL JUNCTION BOX
COMMERCIAL GRADE
MINI JUNCTION BOXES
DI-0841
DI-0980
DI-JBOX-LPS
DI-JBOX-LPL
DI-0940
DI-JBOX-IND
DI-JBOX-OUT
• Reinforced protected terminal block
• Compliant to EN/IEC 60998
• For use with solid or stranded wire up to 14G
For use with
Class 2 Non-Dimmable Drivers - ETL Certified
20W
DI-0904
35W
DI-0918
60W
DI-0906
For use with
Class 2 Drivers - UL Certified
For use with
DI-0909, DI-0928 or DI-0929
For Indoor / Dry Location Class 2 Installations
For Outdoor Wet Location Class 2 Installations
• UL Recognized Component.
• Includes 3-wire push-in terminal block connector.
• Input terminal accepts 20 – 18 AWG cable.
• Output terminal accepts 20 – 14 AWG cable.
• Max Voltage Rating: 300V
• Max Amperage Rating: 10A
HARD-WIRED CONSTANT Voltage 24V NON-DIMMABLE DRIVERS - Dimmable on 24V Side -
The ULTRA BLAZE 24V High Output Strip Light and ARRAY 24V Linkable Light Bar are Diode LED’s only 24V DC fixtures. They require a transformer to convert standard household 120V AC power to 24V DC. Diode LED provides three choices of transformers: a Plug-In Adapter, a Hard-Wired Non-Dimmable Driver, and a Hard-Wired Dimmable Driver.
DI-0970
DI-CV-24V150W
DI-CV-24V330W
DI-1733
35W Class 2 Driver
150W Driver
330W Driver
For use with DI-0957 or DI-CV-24V330W
The
DRIVER MOUNTING BRACKETS allow for easy driver mounting and is an
essential part of most installation inspections. Each order comes with
four brackets and four screws.
Wet / Dry Location
Class 2
Wet / Dry Location
Class 2
Wet / Dry Location
Class 2
Hard-Wired Non-Dimmable Drivers should be hard-wired to household AC power by a licensed electrician. Any of our dimmable light fixtures, powered by a Hard-Wired -Dimmable driver, can be dimmed using any of our 3 REIGN 12V / 24V in-wall switches or the in-line 12V / 24V Dimmer Switch. Note: DIMMING OCCURS on the 24V Side of the Installation.