KLUS TEPIKO Extrusion

To Order, Please Phone or Email Us. We Take Payment Info by Phone. For Your Security, Please do not Email Card Info.

216-352-3685

WE OFFER ALL KLUS ITEMS . CONTACT US For ITEMS NOT SHOWN. - 216-352-3685 | EMAIL US

These Cards Accepted and PROCESSED SECURELY

Very small size

The PIKO-ZM lighting fixture is bendable

Easy LED service

Fits in the thickness of a drywall board (0.47' / 12mm)

Can build light strings (with ZM connectors)

Can build fixtures going seamlessly from built-in to suspended ones

TEPIKO features a “TEPIKO protective insert", which facilitates clean mounting of the fixture in drywall boards

Application

for construction of serviceable LED lighting fixtures, straight and angled, built-in and suspended, producing the effect of a “thin line of light”

Assembly

- TEPIKO is mounted in drywall boards using elastic fixing glues

- the “built-in” PIKO-ZM is mounted in the TEPIKO extrusion with the TEKNIK latch

the “suspended” PIKO-ZM is mounted using other KLU? accessories dedicated to the “small lock”

Additional information

- minimum bend radius of the PIKO-ZM (light directed inside) 8.6' / 220mm

- minimum bend radius of the PIKO-ZM (light directed outside) 4.7' / 120mm

2-PART SYSTEM - CLICK PIKO-ZM TO OPEN PAGE
TEPIKO EXTRUSIONS	PIKO-ZM EXTRUSIONS	ASSOCIATED EXTRUSIONS	END CAPS / ACCESSORIES

SSTANDARD LEAD TIMES

Lead Time May Vary Based on Product Mix / Quantities Ordered

Standard Order - No Cutting

2 - 3 Days

Custom Cuts - Extrusions, Covers or LED Tape

3 - 5 Days

Custom Builds

2 - 3 Weeks

The lead times also apply to all expedited orders; however,
we will try our best to ship on the requested date.

ORDERS BELOW $150.00 are SUBJECT to a $15.00 SERVICE CHARGE

Please Provide SHIPPING ZIP CODE for Shipping Quote

CLICK IMAGE for LARGER VIEW

TEPIKO Extrusion

ITEM	DESCRIPTION	PRICE
18046NA_1	39.4" / 1M Non Anodized Extrusion	$43.00
18046NA_2	78.75" / 2M Non Anodized Extrusion	$86.00

Download for Achieving Line of Light, Full Specifications, Dimensions and Instructions

Here in the US, one of the more important features of LED lighting in direct view, is to achieve “a clean line of light” or in other words, no visible diodes from the LED tape light inside the fixture. Distilling this design constraint down to its basic components produces: Cones of Light and Covers. Expanding on these two characteristics gives us four elements of control when designing a fixture: Cover type, LED spacing, LED output, and Cover to LED spacing.

CLICK for PDF: